Home Guides Fix to WiFi Connected But No Internet Access

Fix to WiFi Connected But No Internet Access [ Tutorial ]

If you’re not able to access the internet although your system is showing connected and when you troubleshoot the issue you notice an error message “WiFi Connected – No Internet access” on your WiFi or LAN network then incorrect configuration issue, network adapter drivers are either outdated, corrupted or incompatible etc. are might be the possible reasons behind this issue. There can be n number of causes as it completely depends on user system configuration and environment, as each user has a different type of setup.

Well, let’s just assume that there are a lot of parameters which can cause such kind of a problem, first being software updates or new installation that may change the registry value.

Sometimes your PC fails to obtain IP or DNS address automatically while it can also be an issue of the driver. So, without wasting any time here you can find How to Fix WiFi Connected but no Internet Access issue with the help of the tutorial that is mentioned below.

Fix to WiFi Connected but No Internet Access [ Tutorial]

Fix to WiFi Connected but No Internet

First of all, let’s outline the steps to resolve “connected but no internet access” issue first. We’ll go into detail on each one after that.

Note: Don’t forget to create a restore point before you get along with the below-mentioned tutorial. It will help you if something went wrong.

Before heading towards to resolve the issue. It is very important to understand what this error exactly means.

Also Read: How To JailBreak Roku 3 or 4 [ It can be possible ]

About “WiFi Connected but No Internet Access” error

Before we proceed, it is very important to explain what exactly happens on your network when you notice this error. To do so, let’s focus on some basics of home networking.

Wireless devices such as laptop connect to your router. All the connections between the devices in your home are handled by the router. The router plugs into a modem, a device that is used to bridge the traffic between your home network and the internet.

When you see the error connected but no internet, Connected, no internet access, or similar errors on your computer, it means that your computer is connected to the router correctly but it is not connecting to the internet. On the contrast, if you see no internet or Not connected, no internet connection messages, it means that your computer is not connected to a router at all.

This gives you some important clues about what the issue is, as we’ll see below.

1. Confirm other devices can’t connect

no internet connection

Before we can get to troubleshooting, it is essential to determine whether your PC is the only device with no internet connection.

Take out your phone or another computer that’s connected to Wi-Fi and see if it is online and working properly.

On Android, you will notice an X icon over the symbol of Wi-Fi and you will see that you’re connected to your mobile network for data. iPhone and iPad users can visit Settings => Wi-Fi and check for the message of no internet connection.

If your computer is the only machine that is not connecting, then there might be a reason for misconfigured setting on that device. But if you are facing the issue on every device, the problem lies with your network equipment and keeping that reason in mind you can skip some of the PC-only steps below.

Before heading toward, if the problem affects all of your devices, you should perform a quick test. Disconnect the Ethernet cable that is connecting your modem to the router, and use it to connect your computer to the modem directly instead.

If you can get online with this setup, the problem is with your router. You should proceed through the following troubleshooting step and not fix your issue; your router is likely the main problem here.

Also Read: How to Delete Apps From iPhone X / XS / XS Max

2. Reboot your PC

This step is optional if you are facing the connection issue on multiple devices.

As with many issues, rebooting your computer is the first troubleshooting step you should try. If you’re lucky, you might clear up some temporary glitch by restarting and then can get back to work.

Most of this advice assumes that you’re using a wireless connection. However, if you connect to your router through an Ethernet cable, you can also try another cable at this time to confirm that yours isn’t faulty.

3. Reboot your modem and router

modem and router

Mostly network issues involve your modem and/or router, in that case rebooting them makes sense. There is no need to restart them through an interface the way you do with your PC, though. Pull the power plug simply from both devices and leave them unplugged for about a minute or two.

Alter that, plug the modem in first and wait to let it boot up, then plug in your router again. Wait for them to start back up. At the time of doing this, confirm that both devices are working properly. If you don’t notice any lights on one of the devices, it clearly means you your hardware device is having the problem.

If your computer is showing “no internet” even after performing this then you need to continue on because your issue is more complex than for a basic reboot.

Note: You’re rebooting, not resetting your device. Resetting means to put a device back to its default settings; there is no need to do that for now.

4. Run the Windows network troubleshooter

Network-Troubleshooter

This step is optional if you are facing the connection issue on multiple devices.

If you’re facing this issue with your Windows PC only, then there may be something wrong with your computer’s network settings. Although Windows troubleshooter usually doesn’t fix issues completely it is worth a try before you should move on.

Go to Settings to access the network troubleshooter then Network & Internet => Status. Select Network troubleshooter and follow the steps to see if it resolves the issue or not.

Note: On Windows 7, you will have to visit Start => Control Panel => Troubleshooting => Network and Internet => Network Connections.

Also Read: How to Setup RoadRunner Email on Android

5. Check your IP address settings

This step is optional if you are facing the connect issue on multiple devices.

Next, you should take one of the important steps to diagnose network issues: first, make sure your computer has a valid IP address. In most of the home networks, the router hands out an address to devices when they connect. If the IP settings of your computer aren’t accurate, it can cause the problem of “no internet access”

On Windows 10, in your System Tray, right-click on the network icon and choose Open Network & Internet settings. Click the Change adapter options entry and after that double-click the connection that you’re using.

Windows-10-Adapter-Settings

On Windows 7, right-click the network icon and select Open Network and Sharing Center. Click on the name of your network that you can see next to Connections.

Windows-7-Network-Sharing-Center

After that, click on the Properties button. Look for Internet Protocol Version 4 in the list and double-click on that. Make sure your system has obtained an IP address and DNS server address automatically both selected.

Windows-IP-Settings

Click OK and then try to get online again to see if this is working for you.

6. Check your ISP’s status

If you are still on the same point, it’s worth checking if your internet service provider (ISP) is having an issue. Although this is quite rare, it could explain why you can’t get online.

Use your phone’s data connection to see if Verizon, Comcast, or whoever provides service in your area has reported outages.

Note: DownDetector is an amazing site for this. A quick Google or Twitter search can clearly reveal whether others are having a problem, too.

Also Read: Stop the AOL Automatic Sign-in Screen [ How To ]

7. Try a few command prompt commands

This step is optional if you are facing the connect issue on multiple devices.

Windows features various networking commands in the command prompt. You need to attempt a few of them when you have no internet access in Windows 10.

Type cmd into the Start Menu after that, right-click on it and select Run as administrator to open a Command Prompt window.

For the purpose of resetting some of the files Windows keep to access the internet, use the below mentioned two commands:

netsh winsock reset

netsh int ip reset

If that doesn’t work for you, try to release your computer’s IP address and obtain a fresh one with these two commands, run one at a time:

ipconfig /release

ipconfig /renew

After that refresh the DNS settings of your computer with this command:

ipconfig /flushdns

If you still have no internet access, then try some more steps that are mentioned below.

Also Read: How To Add Guest Mode To iOS 12 iPhone Or iPad

8. Disable security software

This step is optional if you are facing the connect issue on multiple devices.

Another uncommon, but the considerable scenario is that you have some security software running on your PC preventing access to the internet.

Disable any third-party antivirus apps that you have installed and see if this resolves the connection issue. As we are talking about security, it’s worth running a malware scan with an app like Malwarebytes.

9. Update your wireless drivers

This step is optional if you are facing the connect issue on multiple devices.

In normal cases, you don’t need to update your computer drivers, as doing so often causes more problems. But as you’re still facing the issue, you should definitely check for driver updates.

Also Read: How To Turn Off & Disable Google Now

10. Reset your network

At this point, if you’ve performed all the above-mentioned steps and still have the “no internet access but connected” error, there’s not much you can do to solve that other than resetting network settings.

Windows-Network-Reset

If your Windows 10 PC is the only device you can’t connect with, you can reset your network and for that, you need to visit Settings => Network & Internet => Status. Click on the Network reset text that you can see at the bottom of the screen, after that click on Reset now. This step will completely remove all the network adapters and sets your network settings back to the defaults.

Note: After performing this step you will eventually have to set up everything again. But chances are it might fix the issue.

Unfortunately, there is no equivalent of this in Windows 7, you can only simulate part of this reset.

In your system Tray, Right-click on the network icon, select Open Network and Sharing Center and click Change adapter settings. After that, right-click the adapter you’re using, and select Disable.

Reboot and enable again to see if that fixed anything.

When you can’t get online with any devices, your best option is resetting your router (and modem, if required). Look for a small pinhole on the back or bottom of your router and hold it in for about several seconds to reset it to factory defaults. If you see no reset button, you’ll need to log in to your router and run the factory reset from there.

After resetting everything, you can run the initial setup with factory defaults. If it still won’t work after that, there is a greater chance that is having faulty equipment.

(Via: muo)

Recommended:

Final Words

Hopefully, you don’t come to that point where you will have to factory reset anything to fix your connection issue. You need to carefully implement the earlier steps, but let me tell you that there’s no perfect formula for network issues. If you follow all the steps carefully, you’ve confirmed that your devices are set up correctly and you don’t have anything that is creating an issue and blocking the connection.

That’s it for today. If you still face issues you can feel free to contact us. We would love to help you out.

To find out more: Visit ATechGuides